Storage


Samsung Shows Off A Z-SSD: With New Z-NAND

Samsung Shows Off A Z-SSD: With New Z-NAND

As the sort of person that can get addicted to deep technology discussions about the latest thing, without due care and attention I could easily fall into the pit of storage related technologies. From the storage bits through to software defined cache hierarchy, there is so much to learn and to talk about. Over the last two years, unless you were living under a rock, it would have been hard to miss the level of attention that Intel’s 3D XPoint technology (a co-venture with Micron) has been getting. Billed as a significant disruption to the storage market, and claiming an intersection between DRAM and SSDs as a form of non-volatile storage, many column inches have been devoted to the potential uses of 3D XPoint. Despite all this talk, and promises that Intel’s Super 7 partners are well under way with qualifying the hardware in their datacenters, we are yet to actually see it come to market – or even be actively demonstrated in any sizeable volume at a trade show. We’re expecting more information this year, but while everyone is waiting, Samsung has snuck up behind everyone with their new Z-SSD product line.

The Z-SSD line was announced back at Flash Memory Summit, although details were scant. This was a PCIe NVMe storage technology using Samsung’s new ‘Z-NAND’, which was aimed at the intersection between DRAM and SSDs (sounds like 3D XPoint?). Z-NAND is ultimately still baked in as NAND, although designed differently to provide better NAND characteristics. We still don’t know the exact way this happens – some analysts have pointed to this being 3D NAND/V-NAND running in SLC mode, given some of the performance metrics, but this is still unknown.

At Cloud Expo Europe, Samsung had a Z-SSD on display and started talking numbers, if not the technology itself. The first drive for select customers to qualify will be 800GB in a half-height PCIe 3.0 x4 card. Sequential R/W will be up to 3.2 GBps, with Random R/W up to 750K/160K IOPS. Latency (presumably read latency) will be 70% lower than current NVMe drives, partially due to the new NAND but also a new controller, which we might hear about during Samsung’s next tech day later this year. We are under the impression that the Z-NAND will also have high endurance, especially if it comes down to fewer bits per cell than current NAND offerings, but at this point it is hard to tell.

Initial reports indicated that Samsung was preparing 1TB, 2TB and 4TB drives under the Z-SSD banner. At present only the 800GB is on the table, which if we take into account overprovisioning might just be the 1TB drive anyway. Nothing was said about other capacities or features, except that the customers Samsung is currently dealing with are very interested in getting their hands on the first drives.

Best SSDs: Q1 2017

Best SSDs: Q1 2017

The industry-wide NAND flash shortage has not abated, so there’s little good news for consumers since the holiday edition of this guide. The best deals are a few cents per GB worse than they were during the holiday season. Older SSD models are being withdrawn from the market and current models are often out of stock. At CES we noticed a pattern of companies being ready to launch new models and capacities, but many of them are holding off until they can launch with sensible pricing and volume.

The situation should improve later this year when the next generation of 3D NAND hits the market. With 64 layers or more and up to 512Gb per die for TLC parts, we should finally see 3D NAND from all four major manufacturers making its way into retail SSDs. In the near term however, there’s not much hope for improvement in prices and available drive capacities.

As always, the prices shown are merely a snapshot at the time of writing. We make no attempt to predict when or where the best discounts will be. Instead, this guide should be treated as a baseline against which deals can be compared. All of the drives recommended here are models we have tested in at least one capacity or form factor, but in many cases we have not tested every capacity and form factor. For drives not mentioned in this guide, our SSD Bench database can provide performance information and comparisons.

Premium SATA drives: Samsung 850 PRO

The SanDisk Extreme Pro has all but disappeared from the market, leaving the Samsung 850 PRO as the undisputed king of the SATA SSD market. No other consumer SATA SSD can match the 850 PRO’s combination of performance and a ten-year warranty. For now, the only other SATA SSDs with 3D MLC NAND are ADATA’s SU900 and XPG SX950, both based on Micron’s 3D MLC. Those SSDs offer slightly higher endurance ratings but warranty periods of only 5 and 6 years, and we don’t expect their performance to beat the 850 PRO.

Even the slowest PCIe SSD will outperform the Samsung 850 PRO in most ordinary usage scenarios, and some of those PCIe SSDs are cheaper than the 850 PRO. There are several SATA SSDs that offer performance that is close to the 850 PRO for a substantially lower price, most notably the Samsung 850 EVO. The appeal of the 850 PRO is far narrower than it was when this product first launched. If a new competitor does not emerge for this segment, we may retire this recommendation category entirely as it no longer serves any common consumer use case.

  250/256GB 500/512GB 1TB 2TB
Samsung 850 PRO $139.99 (55¢/GB) $237.76 (46¢/GB) $448.99 (44¢/GB) $854.97 (42¢/GB)
Samsung 850 EVO $93.99 (38¢/GB) $169.99 (34¢/GB) $324.99 (32¢/GB) $689.00 (34¢/GB)

 

Value & Mainstream SATA: Crucial MX300, Mushkin Reactor 1TB

The value segment of the SSD market is where drives sacrifice performance and endurance to reach the lowest possible prices. Since SSD prices have tended to drop across the entire market, it is almost always possible to spend just a little more money to get a significant performance boost. The mid-range segment is a battleground between TLC drives with high enough performance, and any MLC drives that can get the price down without sacrificing their inherent performance advantage over TLC.

The Crucial MX300 continues to be one of the most affordable SSDs on the market. Its combination of Micron 3D TLC and a great Marvell controller allows the the MX300 to deliver performance that is a clear step up from the cheapest planar TLC SSDs, and the MX300’s power consumption is surprisingly low. MLC SSDs and the Samsung 850 EVO still perform much better under heavy sustained workloads, but the MX300 is good enough for most ordinary use.

  250-275GB 500-525GB 1000-1050GB 2TB
Mushkin Reactor $89.99 (35¢/GB) $169.99 (33¢/GB) $246.99 (24¢/GB)  
Samsung 850 EVO $93.99 (38¢/GB) $169.99 (34¢/GB) $324.99 (32¢/GB) $689.00 (34¢/GB)
Crucial MX300 $94.99 (35¢/GB) $149.99 (29¢/GB) $252.08 (24¢/GB) $549.99 (27¢/GB)

 

Standard & M.2 PCIe: Intel SSD 600p and Samsung 960 EVO

As they did in the SATA SSD market with the Samsung 850 EVO, Samsung’s 960 EVO has shown that the combination of 3D TLC and a great controller can hold its own against most MLC-based competitors. Now that it is widely available, we think the 960 EVO offers a good balance of affordability and performance for the PCIe SSD segment.

The Intel SSD 600p is the slowest PCIe SSD on the market, but also the cheapest by far. With pricing comparable to the Samsung 850 EVO, the Intel SSD 600p offers real-world performance that exceeds any SATA SSD. It won’t hold up very well under very heavy sustained workloads, but its performance on ordinary desktop workloads is the reason we’re not recommending the Samsung 850 EVO as a mid-range/mainstream SATA option.

  128GB 250-256GB 500-512GB 1TB 2TB
Samsung 960 EVO   $129.99 (52¢/GB) $249.99 (50¢/GB) $477.99 (48¢/GB)  
Samsung 960 Pro     $327.99 (64¢/GB) $629.99 (62¢/GB) $1299.99 (63¢/GB)
Intel SSD 600p $64.00 (50¢/GB) $99.99 (39¢/GB) $179.99 (35¢/GB) $349.00 (34¢/GB)  

 

M.2 SATA: Samsung 850 EVO and Crucial MX300

M.2 has replaced mSATA as the small form factor of choice, and new product lines are no longer including mSATA variants. Selection of M.2 SATA SSDs is far more limited than 2.5″ drives, but there are enough options to cover a reasonable range of prices and performance levels. The Samsung 850 EVO is the high-performance M.2 SATA drive of choice, and anyone wanting more performance should look to M.2 PCIe SSDs. The Crucial MX300 covers the low end of the market and carries only a slight premium over its 2.5″ counterpart. ADATA and Western Digital offer M.2 versions of their latest entry-level SSDs, but they currently don’t offer the value of the MX300.

  250-275GB 500-525GB 1TB
Samsung 850 EVO M.2 $97.99 (39¢/GB) $167.99 (34¢/GB) $354.95 (35¢/GB)
Crucial MX300 M.2 $89.99 (33¢/GB) $149.99 (29¢/GB) $279.99 (27¢/GB)
Sony Announces SF-G UHS-II SD Cards: Up to Nearly 300 MB/s Read/Write Performance

Sony Announces SF-G UHS-II SD Cards: Up to Nearly 300 MB/s Read/Write Performance

Sony has announced its new lineup of SD cards for advanced 4K/8K, DSLR, and mirrorless cameras. The new SF-G-series memory cards use the UHS-II bus and one of Sony’s proprietary technologies to offer the company’s highest read/write performance to date — up to nearly 300 MB/s. The cards will hit the market in the coming months.

The Sony SF-G-series memory cards will be available in 32 GB (SDHC), 64 GB (SDXC), and 128 GB (SDXC) configurations. The key selling point of the new Sony SF-G cards is their performance: up to 300 MB/s read speed and up to 299 MB/s write speed, which a quick look finds is around 15% faster compared to competing products (such as the SanDisk Extreme PRO SD UHS-II or the Lexar Professional 2000x UHS-II, both of which offer up to 260 MB/s writes). The new cards from Sony are compatible with various types of SD-supporting devices (cameras, card readers, etc.), but to take full advantage of their speed one needs a device that fully supports the UHS-II bus and has the extra pins the wider bus requires.

Sony is not reveaing how they’re getting up to 299 MB/s sequential write performance in an SD card, instead only saying that it is enabled by its firmware. One possibility is that the cards use NAND flash memory with very large block sizes (supported by the SD 5.0 standard), which helps to boost write performance. In addition, the NAND controller inside the card may have a special pSLC cache with very fast writes and rather low usable capacities of the devices imply on that, but this could be verified only by testing one of these products.

Sony UHS-II SD Cards at Glance
  32 GB
SF-G32
64 GB
SF-G64
128 GB
SF-G128
Usable Capacity 28.8 GB 57.6 GB 115.2 GB
Read Speed up to 300 MB/s
Write Speed up to 299 MB/s
Minimum Sequential Write Speed 30 MB/s
Interface UHS-II
Availability Spring 2017
SDA Labels UHS-II, Class 10, U3

The new cards from Sony carry the Class 10 and U3 labels to show that their performance does not drop below 10 and 30 MB/s when used with those standards’ respective workloads. Being positioned for professional use, the Sony SF-G cards are also waterproof, static-proof, temperature-proof, and shock-proof, which is beneficial for people who travel a lot and/or have to use memory cards in tough conditions. In case the data on cards is lost, Sony supplies its File Rescue tool with them.

Sony’s SF-G-series SDXC cards will be available this spring. Pricing is to be determined, but it will vary depending on capacities. In addition to the flash memory cards, Sony will also offer its clients a UHS-II-capable MRW-S1 card reader with USB 3.0 interface, whose price is also unknown.

Related Reading:

Sony Announces SF-G UHS-II SD Cards: Up to Nearly 300 MB/s Read/Write Performance

Sony Announces SF-G UHS-II SD Cards: Up to Nearly 300 MB/s Read/Write Performance

Sony has announced its new lineup of SD cards for advanced 4K/8K, DSLR, and mirrorless cameras. The new SF-G-series memory cards use the UHS-II bus and one of Sony’s proprietary technologies to offer the company’s highest read/write performance to date — up to nearly 300 MB/s. The cards will hit the market in the coming months.

The Sony SF-G-series memory cards will be available in 32 GB (SDHC), 64 GB (SDXC), and 128 GB (SDXC) configurations. The key selling point of the new Sony SF-G cards is their performance: up to 300 MB/s read speed and up to 299 MB/s write speed, which a quick look finds is around 15% faster compared to competing products (such as the SanDisk Extreme PRO SD UHS-II or the Lexar Professional 2000x UHS-II, both of which offer up to 260 MB/s writes). The new cards from Sony are compatible with various types of SD-supporting devices (cameras, card readers, etc.), but to take full advantage of their speed one needs a device that fully supports the UHS-II bus and has the extra pins the wider bus requires.

Sony is not reveaing how they’re getting up to 299 MB/s sequential write performance in an SD card, instead only saying that it is enabled by its firmware. One possibility is that the cards use NAND flash memory with very large block sizes (supported by the SD 5.0 standard), which helps to boost write performance. In addition, the NAND controller inside the card may have a special pSLC cache with very fast writes and rather low usable capacities of the devices imply on that, but this could be verified only by testing one of these products.

Sony UHS-II SD Cards at Glance
  32 GB
SF-G32
64 GB
SF-G64
128 GB
SF-G128
Usable Capacity 28.8 GB 57.6 GB 115.2 GB
Read Speed up to 300 MB/s
Write Speed up to 299 MB/s
Minimum Sequential Write Speed 30 MB/s
Interface UHS-II
Availability Spring 2017
SDA Labels UHS-II, Class 10, U3

The new cards from Sony carry the Class 10 and U3 labels to show that their performance does not drop below 10 and 30 MB/s when used with those standards’ respective workloads. Being positioned for professional use, the Sony SF-G cards are also waterproof, static-proof, temperature-proof, and shock-proof, which is beneficial for people who travel a lot and/or have to use memory cards in tough conditions. In case the data on cards is lost, Sony supplies its File Rescue tool with them.

Sony’s SF-G-series SDXC cards will be available this spring. Pricing is to be determined, but it will vary depending on capacities. In addition to the flash memory cards, Sony will also offer its clients a UHS-II-capable MRW-S1 card reader with USB 3.0 interface, whose price is also unknown.

Related Reading:

LaCie Launches Rugged and d2 Thunderbolt 3 Storage Devices

LaCie Launches Rugged and d2 Thunderbolt 3 Storage Devices

LaCie at CES introduced its new storage devices with Thunderbolt 3 interface. The new LaCie Rugged Thunderbolt USB-C and the LaCie d2 Thunderbolt 3 support 2.5” and 3.5” storage devices, use Intel’s DSL6540 Thunderbolt 3 chips and can expand storage capacities of contemporary PCs up to 10 TB.

The LaCie Rugged Thunderbolt USB-C: 500 GB to 5 TB Capacity, TB3 Compatibility

The LaCie Rugged Thunderbolt USB-C drives can be connected to almost any modern computer with a USB 3.0 Type-A, USB 3.0 Type-C and Thunderbolt 3 ports using a USB or a TB cable. Furthermore, the drives feature previous-generation Thunderbolt connectors to maintain compatibility and offer high performance with systems like Apple’s Mac Pro. The LaCie Rugged Thunderbolt USB-C will be available in two versions: the thinner one will support SSDs and HDDs up to 1 TB and 2 TB respectively, another is for 2.5″/15 mm HDDs and will use Seagate BarraCuda HDDs with 4 or 5 TB capacity. When it comes to performance, the SSD-based Rugged Thunderbolt USB-C will offer a maximum read speed of up to 510 MB/s, whereas HDD-based drives will offer up to 130 MB/s transfer rates.

LaCie Rugged Thunderbolt USB-C
Capacity Model Number Thickness Width Depth Weight
500 GB STFS500400 0.984in
25mm
3.5in
88.9mm
5.516in
140.1mm
0.882lb
0.4kg
1 TB STFS1000401
2 TB Apple STFS2000800
2 TB STFS2000400
4 TB Apple STFS4000800 1.339in
34mm
3.579in
90.9mm
5.843in
148.4mm
1.323lb
0.6kg
4 TB STFS4000400
5 TB Apple STFS5000800
5 TB STFS5000400

Traditionally, the LaCie Rugged drives come in IP54-rated white and orange enclosure that protects against shocks, dust and water. In addition, the drives support AES-256 software encryption.

The new LaCie Rugged Thunderbolt USB-C drives will be available this quarter starting at $249.99.

The LaCie d2: Up to 10 TB Capacity, TB3 Compatibility

The LaCie d2 are a bit less flexible storage devices compared to their rugged brethren when it comes to compatibility (they do not feature older Thunderbolt connectors), but they offer higher capacities and higher performance compared to HDD-based versions of the Rugged Thunderbolt USB-C.

LaCie Rugged Thunderbolt USB-C
Capacity Model Number Thickness Height Depth Weight
6 TB STFY6000400 2.362in
60mm
8.543in
217mm
5.118in
130mm
4.85lb
2.2kg
8 TB STFY8000400
10 TB STFY10000400

The LaCie d2 drives pack Seagate’s BarraCuda 3.5” HDDs with 6, 8 and 10 TB capacities (so, the top-of-the-range model is helium-filled), come with a Thunderbolt 3 interface only and are compatible with systems featuring TB3, USB 3.1/3.0 Type-C and USB 3.0 Type-A ports (with an appropriate adapter). The LaCie d2 feature two TB3 headers and can be daisy-chained with other TB3-supporting devices. When it comes to performance, the high-end model offers up to 240 MB/s data rate, the more affordable devices will be a little slower.

Since the d2 drives use premium BarraCuda HDDs, they are backed by a five-year warranty. As for the pricing, it starts at $429.99 for a 6 TB model.

Gallery: