Smartphones


HTC 10: A Quick Look At Battery Life & Storage Performance

HTC 10: A Quick Look At Battery Life & Storage Performance

While I’m still working on the full review for the HTC 10, there’s obviously a lot of questions flying around for at least a few of the claims that HTC is making. While I’m still not quite sure how I feel about the audio and camera on the HTC 10, I can at least start to talk about battery life. While the HTC 10 uses the same Snapdragon 820 SOC we’ve already seen a couple of other places – and as a result application performance doesn’t deviate much from those other phones – the same cannot be said for battery life, as the choice of displays and firmware optimizations play a major role here.

As mentioned in part 1 of the Galaxy S7 review, our new web browsing battery life test attempts to have much more realistic workloads. In addition to updating the test pages to modern websites, we’ve added a component of scrolling through webpages which will help with making a more realistic and reasonable test. While we don’t have a touchscreen CPU boost interrupt firing upon scrolling, scrolling introduces a workload that can test how well the governor can select a proper CPU frequency to complete a fixed amount of work over a given amount of time rather than simply detecting a high CPU load and sending the CPU into a maximum performance state. The scrolling component also means that we no longer give PSR more credit than it realistically should have, and provides some kind of stress upon the display pipeline that we previously left unexplored.

Web Browsing Battery Battery Life 2016 (WiFi)

In WiFi, we can pretty clearly see that the HTC 10 actually has a notable lead over the Galaxy S7 with Snapdragon 820, although the difference isn’t necessarily enormous. I’m actually pretty surprised by this showing from the HTC 10 because our test is specifically designed to decrease the average APL with a few pages that have dark themes. Another factor that tilts the scales against the HTC 10 when comparing against phones like the Galaxy S7 is that the Galaxy S7 has an undefeatable power save mode which drops brightness by more than half and throttles the CPU noticeably, while the HTC 10 was run with all power save options disabled.

Web Browsing Battery Battery Life 2016 (LTE)

On the LTE side, we see the same sort of pattern continue. Qualcomm’s modem prowress is showing here on the S820 devices, as they’ve managed to get WiFi and LTE power drain to be effectively equal in situations where the power amplifier on the transmit side isn’t trying to pull a watt or so to keep a connection to an eNodeB. Interestingly enough, one thing that our old web browsing test didn’t catch was that LTE modem efficiency on the Galaxy S6 is pretty disappointing. Our new test simulates the effects of ads on webpage loads, so I suspect that the Verizon Galaxy S6’s modem is not very efficient at idle, while the sort of race to sleep workload that we saw in the old web browsing test wouldn’t show these issues.

Web Browsing Battery Life (WiFi)

In the interest of having a comparison that is basically almost all static display at this point, I also ran our last generation web browsing test. As another data point it’s pretty interesting because this actually suggests that Samsung AMOLED is more efficient than HTC’s LCD, which is probably a function of the much higher subpixel density as HTC is using RGB stripe instead of PenTile. Given that the HTC 10’s Tianma display definitely doesn’t use photoalignment to achieve higher contrast ratios and its relatively low maximum brightness compared to the Galaxy S7, this result is really more in line with what I was expecting. I’m honestly curious as to what optimizations HTC is doing here to pull off better power efficiency here in our 2016 web browsing test, because the SoC bin in the HTC 10 review unit is noticeably worse than the Galaxy S7 and Galaxy S7 edge that I received. It’s unlikely that this will be the case on average when comparing devices as a whole, but for our review it will affect relative results. On top of this, the display doesn’t seem to be particularly efficient compared to the Galaxy S7’s AMOLED display as seen in the test results above.

In the interest of discussing throttling performance and to get an idea for what the lower bound of battery life is like on the HTC 10, I also went ahead and put it through our Basemark OS II and GFXBench battery life test. While we’re actively transitioning to GFXBench 4 and also moving to a newer Manhattan 3.1 battery life test, for 1440p Snapdragon 820 devices our traditional T-Rex rundown is sufficient to show throttling behavior and give an idea of what the lower bound for performance looks like.

BaseMark OS II Battery Life

BaseMark OS II Battery Score

Starting with Basemark OS II, we’re really seeing the effects that a worse bin has on the HTC 10 as the device noticeably trails the Galaxy S7 here, but overall runtime is pretty similar as the difference in display efficiency is going to be minimized. We’re also seeing a difference in the kind of load that the two devices can sustain, as the HTC 10’s aluminum unibody means the maximum allowed skin temperature is going to be lower than what the glass-backed Galaxy S7 will allow. Whatever the case, the Galaxy S7 is ahead here.

GFXBench 3.0 Battery Life

GFXBench 3.0 Performance Degradation

In GFXBench again we can see a similar sort of pattern in which the HTC 10 lasts about as long as the Galaxy S7, but in general it tends to throttle faster. However, it’s possible to see how the Galaxy S7’s throttling is best described as oddly configured as Samsung seems to prefer some oscillating behavior which negatively affects power efficiency before settling into steady state in the long run. It’s probably not a surprise that both have the same steady state as the back cover of the HTC 10 distributes heat quite evenly and both are roughly the same size.  At any rate, the HTC 10 ends up being quite similar if you’re only comparing runtime and steady state frame rate, although the Galaxy S7 does manage to sustain more time before throttling down.

Whatever the case, overall battery life between the Galaxy S7 and HTC 10 are going to be similar, although how similar is going to be workload dependent and the bin of the SoC you end up getting. If your workload is almost purely display-bound, the Galaxy S7 seems to come out on top. If your usage is more mixed and primarily stresses the CPU like our 2016 web browsing test, the HTC 10 will edge out the Galaxy S7 and iPhone 6s by a nose. If you intend on running power viruses on your phone, it’s likely that the bin of your SoC will matter more than anything else but runtime on both devices will be similar. Of course, due to the aluminum unibody limiting maximum skin temperatures the HTC 10 will probably start to throttle sooner but steady state performance should be similar. If you want a clear upgrade in battery life, basically the only choice at this time seems to be to go to a larger device like the Galaxy S7 edge.

Outside of battery life, one inevitable question is whether the HTC 10’s eMMC is a detriment to the device. While this is by no means an exhaustive examination of storage performance, we can look at AndroBench 4 to get a good idea for performance. Unfortunately with Android 6 AndroBench 3.6 has broken timers yet again leading to wildly inaccurate figures for performance, and AndroBench 4 varies significantly from run to run for random read and write so for now we really can only disclose sequential figures with any level of confidence that these are comparable to AndroBench 3.6 and StorageBench performance figures.

Internal NAND - Sequential Read

Internal NAND - Sequential Write

If you were fully expecting the HTC 10 to perform worse than the Samsung Galaxy S7 here like I was, you’ll probably be surprised to learn that it doesn’t actually do worse all the time. In this test at least, write performance of the HTC 10 is 75% greater than the Samsung MLC UFS solution in the Galaxy S7 due to the use of an SLC write cache. However, sequential reads on the Galaxy S7 are about 35% higher than what they are on the HTC 10. The same sort of pattern repeats itself in the random read and write tests for AndroBench 4, so at a high level it’s pretty fair to say that things like burst camera photos, app updates, and similar write-intensive operations are going to be faster on the HTC 10, while read-intensive operations like loading apps may be slightly faster on the Galaxy S7 if storage reads are the critical path.

Overall, it’s clear to me that the HTC 10 could be a contender for high end Android smartphones. If you were just to go down the spec sheet, it’s probably fairly easy to conclude that HTC can’t really go toe to toe with Samsung. However, with our tests so far there is a surprising amount of nuance to all of these comparisons that has to be considered. Battery life seems to be worse than the Galaxy S7 if you just consider display or SoC efficiency, but in a mixed use scenario HTC manages to close the gap. NAND performance seems to inevitably trail the Galaxy S7, but with the right eMMC selection HTC has a significant lead in write performance in all scenarios. In my experience, this seems to be the overall story of the HTC 10 thus far, although there are cases where one device is clearly superior to the other. Of course, this will have to wait for the full review, which should be in the near future.

HTC 10: A Quick Look At Battery Life & Storage Performance

HTC 10: A Quick Look At Battery Life & Storage Performance

While I’m still working on the full review for the HTC 10, there’s obviously a lot of questions flying around for at least a few of the claims that HTC is making. While I’m still not quite sure how I feel about the audio and camera on the HTC 10, I can at least start to talk about battery life. While the HTC 10 uses the same Snapdragon 820 SOC we’ve already seen a couple of other places – and as a result application performance doesn’t deviate much from those other phones – the same cannot be said for battery life, as the choice of displays and firmware optimizations play a major role here.

As mentioned in part 1 of the Galaxy S7 review, our new web browsing battery life test attempts to have much more realistic workloads. In addition to updating the test pages to modern websites, we’ve added a component of scrolling through webpages which will help with making a more realistic and reasonable test. While we don’t have a touchscreen CPU boost interrupt firing upon scrolling, scrolling introduces a workload that can test how well the governor can select a proper CPU frequency to complete a fixed amount of work over a given amount of time rather than simply detecting a high CPU load and sending the CPU into a maximum performance state. The scrolling component also means that we no longer give PSR more credit than it realistically should have, and provides some kind of stress upon the display pipeline that we previously left unexplored.

Web Browsing Battery Battery Life 2016 (WiFi)

In WiFi, we can pretty clearly see that the HTC 10 actually has a notable lead over the Galaxy S7 with Snapdragon 820, although the difference isn’t necessarily enormous. I’m actually pretty surprised by this showing from the HTC 10 because our test is specifically designed to decrease the average APL with a few pages that have dark themes. Another factor that tilts the scales against the HTC 10 when comparing against phones like the Galaxy S7 is that the Galaxy S7 has an undefeatable power save mode which drops brightness by more than half and throttles the CPU noticeably, while the HTC 10 was run with all power save options disabled.

Web Browsing Battery Battery Life 2016 (LTE)

On the LTE side, we see the same sort of pattern continue. Qualcomm’s modem prowress is showing here on the S820 devices, as they’ve managed to get WiFi and LTE power drain to be effectively equal in situations where the power amplifier on the transmit side isn’t trying to pull a watt or so to keep a connection to an eNodeB. Interestingly enough, one thing that our old web browsing test didn’t catch was that LTE modem efficiency on the Galaxy S6 is pretty disappointing. Our new test simulates the effects of ads on webpage loads, so I suspect that the Verizon Galaxy S6’s modem is not very efficient at idle, while the sort of race to sleep workload that we saw in the old web browsing test wouldn’t show these issues.

Web Browsing Battery Life (WiFi)

In the interest of having a comparison that is basically almost all static display at this point, I also ran our last generation web browsing test. As another data point it’s pretty interesting because this actually suggests that Samsung AMOLED is more efficient than HTC’s LCD, which is probably a function of the much higher subpixel density as HTC is using RGB stripe instead of PenTile. Given that the HTC 10’s Tianma display definitely doesn’t use photoalignment to achieve higher contrast ratios and its relatively low maximum brightness compared to the Galaxy S7, this result is really more in line with what I was expecting. I’m honestly curious as to what optimizations HTC is doing here to pull off better power efficiency here in our 2016 web browsing test, because the SoC bin in the HTC 10 review unit is noticeably worse than the Galaxy S7 and Galaxy S7 edge that I received. It’s unlikely that this will be the case on average when comparing devices as a whole, but for our review it will affect relative results. On top of this, the display doesn’t seem to be particularly efficient compared to the Galaxy S7’s AMOLED display as seen in the test results above.

In the interest of discussing throttling performance and to get an idea for what the lower bound of battery life is like on the HTC 10, I also went ahead and put it through our Basemark OS II and GFXBench battery life test. While we’re actively transitioning to GFXBench 4 and also moving to a newer Manhattan 3.1 battery life test, for 1440p Snapdragon 820 devices our traditional T-Rex rundown is sufficient to show throttling behavior and give an idea of what the lower bound for performance looks like.

BaseMark OS II Battery Life

BaseMark OS II Battery Score

Starting with Basemark OS II, we’re really seeing the effects that a worse bin has on the HTC 10 as the device noticeably trails the Galaxy S7 here, but overall runtime is pretty similar as the difference in display efficiency is going to be minimized. We’re also seeing a difference in the kind of load that the two devices can sustain, as the HTC 10’s aluminum unibody means the maximum allowed skin temperature is going to be lower than what the glass-backed Galaxy S7 will allow. Whatever the case, the Galaxy S7 is ahead here.

GFXBench 3.0 Battery Life

GFXBench 3.0 Performance Degradation

In GFXBench again we can see a similar sort of pattern in which the HTC 10 lasts about as long as the Galaxy S7, but in general it tends to throttle faster. However, it’s possible to see how the Galaxy S7’s throttling is best described as oddly configured as Samsung seems to prefer some oscillating behavior which negatively affects power efficiency before settling into steady state in the long run. It’s probably not a surprise that both have the same steady state as the back cover of the HTC 10 distributes heat quite evenly and both are roughly the same size.  At any rate, the HTC 10 ends up being quite similar if you’re only comparing runtime and steady state frame rate, although the Galaxy S7 does manage to sustain more time before throttling down.

Whatever the case, overall battery life between the Galaxy S7 and HTC 10 are going to be similar, although how similar is going to be workload dependent and the bin of the SoC you end up getting. If your workload is almost purely display-bound, the Galaxy S7 seems to come out on top. If your usage is more mixed and primarily stresses the CPU like our 2016 web browsing test, the HTC 10 will edge out the Galaxy S7 and iPhone 6s by a nose. If you intend on running power viruses on your phone, it’s likely that the bin of your SoC will matter more than anything else but runtime on both devices will be similar. Of course, due to the aluminum unibody limiting maximum skin temperatures the HTC 10 will probably start to throttle sooner but steady state performance should be similar. If you want a clear upgrade in battery life, basically the only choice at this time seems to be to go to a larger device like the Galaxy S7 edge.

Outside of battery life, one inevitable question is whether the HTC 10’s eMMC is a detriment to the device. While this is by no means an exhaustive examination of storage performance, we can look at AndroBench 4 to get a good idea for performance. Unfortunately with Android 6 AndroBench 3.6 has broken timers yet again leading to wildly inaccurate figures for performance, and AndroBench 4 varies significantly from run to run for random read and write so for now we really can only disclose sequential figures with any level of confidence that these are comparable to AndroBench 3.6 and StorageBench performance figures.

Internal NAND - Sequential Read

Internal NAND - Sequential Write

If you were fully expecting the HTC 10 to perform worse than the Samsung Galaxy S7 here like I was, you’ll probably be surprised to learn that it doesn’t actually do worse all the time. In this test at least, write performance of the HTC 10 is 75% greater than the Samsung MLC UFS solution in the Galaxy S7 due to the use of an SLC write cache. However, sequential reads on the Galaxy S7 are about 35% higher than what they are on the HTC 10. The same sort of pattern repeats itself in the random read and write tests for AndroBench 4, so at a high level it’s pretty fair to say that things like burst camera photos, app updates, and similar write-intensive operations are going to be faster on the HTC 10, while read-intensive operations like loading apps may be slightly faster on the Galaxy S7 if storage reads are the critical path.

Overall, it’s clear to me that the HTC 10 could be a contender for high end Android smartphones. If you were just to go down the spec sheet, it’s probably fairly easy to conclude that HTC can’t really go toe to toe with Samsung. However, with our tests so far there is a surprising amount of nuance to all of these comparisons that has to be considered. Battery life seems to be worse than the Galaxy S7 if you just consider display or SoC efficiency, but in a mixed use scenario HTC manages to close the gap. NAND performance seems to inevitably trail the Galaxy S7, but with the right eMMC selection HTC has a significant lead in write performance in all scenarios. In my experience, this seems to be the overall story of the HTC 10 thus far, although there are cases where one device is clearly superior to the other. Of course, this will have to wait for the full review, which should be in the near future.

Meizu Announces New PRO 6

Meizu Announces New PRO 6

Today Meizu launches the new PRO 6. The company had launched the PRO 5 only last September so this is a significant change in the release-schedule of the PRO series as we see the new unit come a mere 7 months after its predecessor. The “Pro” series initially debuted with the MX4Pro which we reviewed last year, since then Meizu has dropped the MX name to better differentiate between the “premium” PRO models and the more mainstream MX lineup. The PRO 6 in some ways continues where the PRO 5 left off, but at the same time makes some larger changes in terms of form-factor and component choices. 

Meizu PRO Series Specifications
  Meizu PRO 6 Meizu PRO 5
SoC MediaTek Helio X25
2x A72 @ 2.5GHz
4x A53 @ 2.0GHz
4x A53 @ 1.4GHz

Mali T880MP4 @ 850MHz

Samsung Exynos 7420
4x A57 @ 2.1GHz
4x A53 @ 1.5GHz

Mali T760MP8 @ 770MHz

RAM 4GB LPDDR3-1866 3 / 4GB LPDDR4-3200
NAND 32 / 64GB eMMC 5.1 NAND 32 / 64GB UFS 2.0
+ microSD
Display 5.2” 1080p AMOLED 5.7” 1080p AMOLED
Modem 2G/3G/4G LTE Cat 6
(Integrated MediaTek SoC Modem)
2G/3G/4G LTE Cat 6
Dimensions 147.7 (h) x 70.8 (w) x 7.25 (d) mm
160g
156.7 (h) x 78 (w) x 7.5 (d) mm
168g
Camera Rear Camera
21.16MP ( 5444 x 4016 )
Sony IMX230 1/2.4″ 1.12µm pixels
F/2.2 aperture
w/ Laser & Phase Detection focus
Rear Camera
21.16MP ( 5444 x 4016 )
Sony IMX230 1/2.4″ 1.12µm pixels
F/2.0 aperture
w/ Laser & Phase Detection focus
w/ Dedicated Samsung ISP
Front Facing Camera
5MP 1.4µm pixels
F/2.0 aperture
Front Facing Camera
5MP 1.4µm pixels
F/2.0 aperture
Battery 2560mAh (~9.85 Whr) 3050mAh (~11.74 Whr)
Launch OS Android 6.0 with FlyMe 5.6 Android 5.1 with FlyMe 5.0
Connectivity 802.11a/b/g/n 2.4 & 5GHz
BT 4.1, GPS/GNSS
USB-C 3.1
802.11 b/g/n/ac 2.4 & 5GHz
BT 4.1 + BLE, GPS/GNSS
USB-C
SIM Size NanoSIM + NanoSIM NanoSIM
Launch MSRP 32GB
RMB ¥2499
(USD~386, ~340€, ~271£)
3GB/32GB
RMB ¥2799
(USD~438, ~393€)
64GB
RMB ¥2799
(USD~432, ~381€, ~304£)
4GB/64GB
RMB ¥3099
(USD~485, ~435€)

The PRO 6 is quite a strange successor as at first glance the upgrades aren’t quite evident. The PRO 6 replaces the traditional Samsung LSI Exynos SoCs with MediaTek’s Helio X25. The X25 is exclusive to the PRO 6 and essentially is an X20 with the dual-core A72 cluster clocked in at 2.5GHz instead of 2.3GHz. The three-cluster design also features a quad-core A53 at 2.0GHz as well as a low-power A53 quad-core at 1.4GHz. On the GPU side we see a Mali T880MP4 at 850MHz. Main memory is 4GB of LPDDR3 running at 933MHz.

The SoC choice puts the PRO 6 in a weird position when compared to the PRO 5 as except for single-thread performance the X25 should theoretically represent a downgrade compared to the Exynos 7420 in last year’s model. It’s especially in terms of power efficiency where this raises question as we move from a 14nm FinFET design back to a 20nm planar manufacturing process, so I hope that Meizu’s SoC choice doesn’t negatively impact power efficiency of the phone.

In terms of design the PRO 6 doesn’t differ too much from the PRO 5, that is until one takes into account the form-factor of the new model. On the front we see very little distiguishable differences – except for the fact that Meizu downgraded the screen size from 5.7″ down to 5.2″ marking a departure from the larger “phablet” size. The display panel remains a 1080p AMOLED sourced by Samsung Display.

A first for Meizu is now the inclusion of a pressure sensitive touchscreen module which Meizu calls 3D Press. As we’ve seen in Apple’s latest iPhones or even Huawei’s implementation on the Mate S, this is a hardware feature that will undoubtedly depend on the software framework and applications to expose and take advantage of the new functionality. Meizu here might have some better lee-way in terms of Android customization when compared to other vendors who have to adhere to Google’s CTS requirements, so it will be interesting to see what Meizu was able to come up with in the latest FlyMe 5.6 OS.

The reduction in size also has an impact on the integrated battery’s capacity as we move from a 3050mAh cell down to a 2560mAh unit. Oddly enough, the device only loses 8g and remains relatively heavy for a 5.2″ device, coming at 160g.

The main camera remains unchanged from the PRO 5, we find the same 21.16MP Sony IMX230 module featuring both PDAF as well as Laser auto-focus. We see a downgrade in the optics as the PRO 6 features an aperture of F/2.2 compared to the PRO 5’s F/2.0 lens. The front-facing camera remains a 5MP unit with 1.4µm pixels.

The PRO 6 comes in 32GB or 64GB models RMB ¥2499 (USD~386, ~340€, ~271£) and RMB ¥2799 
(USD~432, ~381€, ~304£) with pre-orders starting now.

Meizu Announces New PRO 6

Meizu Announces New PRO 6

Today Meizu launches the new PRO 6. The company had launched the PRO 5 only last September so this is a significant change in the release-schedule of the PRO series as we see the new unit come a mere 7 months after its predecessor. The “Pro” series initially debuted with the MX4Pro which we reviewed last year, since then Meizu has dropped the MX name to better differentiate between the “premium” PRO models and the more mainstream MX lineup. The PRO 6 in some ways continues where the PRO 5 left off, but at the same time makes some larger changes in terms of form-factor and component choices. 

Meizu PRO Series Specifications
  Meizu PRO 6 Meizu PRO 5
SoC MediaTek Helio X25
2x A72 @ 2.5GHz
4x A53 @ 2.0GHz
4x A53 @ 1.4GHz

Mali T880MP4 @ 850MHz

Samsung Exynos 7420
4x A57 @ 2.1GHz
4x A53 @ 1.5GHz

Mali T760MP8 @ 770MHz

RAM 4GB LPDDR3-1866 3 / 4GB LPDDR4-3200
NAND 32 / 64GB eMMC 5.1 NAND 32 / 64GB UFS 2.0
+ microSD
Display 5.2” 1080p AMOLED 5.7” 1080p AMOLED
Modem 2G/3G/4G LTE Cat 6
(Integrated MediaTek SoC Modem)
2G/3G/4G LTE Cat 6
Dimensions 147.7 (h) x 70.8 (w) x 7.25 (d) mm
160g
156.7 (h) x 78 (w) x 7.5 (d) mm
168g
Camera Rear Camera
21.16MP ( 5444 x 4016 )
Sony IMX230 1/2.4″ 1.12µm pixels
F/2.2 aperture
w/ Laser & Phase Detection focus
Rear Camera
21.16MP ( 5444 x 4016 )
Sony IMX230 1/2.4″ 1.12µm pixels
F/2.0 aperture
w/ Laser & Phase Detection focus
w/ Dedicated Samsung ISP
Front Facing Camera
5MP 1.4µm pixels
F/2.0 aperture
Front Facing Camera
5MP 1.4µm pixels
F/2.0 aperture
Battery 2560mAh (~9.85 Whr) 3050mAh (~11.74 Whr)
Launch OS Android 6.0 with FlyMe 5.6 Android 5.1 with FlyMe 5.0
Connectivity 802.11a/b/g/n 2.4 & 5GHz
BT 4.1, GPS/GNSS
USB-C 3.1
802.11 b/g/n/ac 2.4 & 5GHz
BT 4.1 + BLE, GPS/GNSS
USB-C
SIM Size NanoSIM + NanoSIM NanoSIM
Launch MSRP 32GB
RMB ¥2499
(USD~386, ~340€, ~271£)
3GB/32GB
RMB ¥2799
(USD~438, ~393€)
64GB
RMB ¥2799
(USD~432, ~381€, ~304£)
4GB/64GB
RMB ¥3099
(USD~485, ~435€)

The PRO 6 is quite a strange successor as at first glance the upgrades aren’t quite evident. The PRO 6 replaces the traditional Samsung LSI Exynos SoCs with MediaTek’s Helio X25. The X25 is exclusive to the PRO 6 and essentially is an X20 with the dual-core A72 cluster clocked in at 2.5GHz instead of 2.3GHz. The three-cluster design also features a quad-core A53 at 2.0GHz as well as a low-power A53 quad-core at 1.4GHz. On the GPU side we see a Mali T880MP4 at 850MHz. Main memory is 4GB of LPDDR3 running at 933MHz.

The SoC choice puts the PRO 6 in a weird position when compared to the PRO 5 as except for single-thread performance the X25 should theoretically represent a downgrade compared to the Exynos 7420 in last year’s model. It’s especially in terms of power efficiency where this raises question as we move from a 14nm FinFET design back to a 20nm planar manufacturing process, so I hope that Meizu’s SoC choice doesn’t negatively impact power efficiency of the phone.

In terms of design the PRO 6 doesn’t differ too much from the PRO 5, that is until one takes into account the form-factor of the new model. On the front we see very little distiguishable differences – except for the fact that Meizu downgraded the screen size from 5.7″ down to 5.2″ marking a departure from the larger “phablet” size. The display panel remains a 1080p AMOLED sourced by Samsung Display.

A first for Meizu is now the inclusion of a pressure sensitive touchscreen module which Meizu calls 3D Press. As we’ve seen in Apple’s latest iPhones or even Huawei’s implementation on the Mate S, this is a hardware feature that will undoubtedly depend on the software framework and applications to expose and take advantage of the new functionality. Meizu here might have some better lee-way in terms of Android customization when compared to other vendors who have to adhere to Google’s CTS requirements, so it will be interesting to see what Meizu was able to come up with in the latest FlyMe 5.6 OS.

The reduction in size also has an impact on the integrated battery’s capacity as we move from a 3050mAh cell down to a 2560mAh unit. Oddly enough, the device only loses 8g and remains relatively heavy for a 5.2″ device, coming at 160g.

The main camera remains unchanged from the PRO 5, we find the same 21.16MP Sony IMX230 module featuring both PDAF as well as Laser auto-focus. We see a downgrade in the optics as the PRO 6 features an aperture of F/2.2 compared to the PRO 5’s F/2.0 lens. The front-facing camera remains a 5MP unit with 1.4µm pixels.

The PRO 6 comes in 32GB or 64GB models RMB ¥2499 (USD~386, ~340€, ~271£) and RMB ¥2799 
(USD~432, ~381€, ~304£) with pre-orders starting now.

Hands On With The HTC 10: A Fresh Start

At this point it’s probably not a secret that HTC has been struggling for the past few years. While the One M8 was a solid upgrade to the One M7, it was unfortunate in the sense that it did not resolve the problems that the M7 had. HTC made a leap in extending the One’s core strengths of an aluminum unibody design, dual front-facing speakers, and generally polished user experience, but they left other matters unresolved. More frustratingly, with the One M9 it seemed that HTC had taken a step back as there was very little that had meaningfully changed, and it wasn’t entirely unusual to see changes that were a regression relative to the One M8. To be honest, I was ready to write off HTC entirely from the market as the One M9+ felt like it was just more of the same mistakes from HTC.

To see if the HTC 10 is more of the same, read on for the full article.