HDD

Western Digital: Sales of Helium-Filled HDDs Accelerating, 15M Sold So Far
  • Comments are Closed

Western Digital: Sales of Helium-Filled HDDs Accelerating, 15M Sold So Far

Western Digital recently announced that it had sold 15 million helium-filled hard drives, indicating that sales of such HDDs are accelerating. Since the launch of the HGST HelioSeal platform about 3.5 years ago, it has enabled HGST to make a number of technological improvements to its hard drives in terms of their capacities. It is noteworthy that while Western Digital is expanding usage of helium, it has not announced plans to expand usage of shingled-magnetic recording (SMR).

HGST, a subsidiary of Western Digital, started volume shipments of its first-generation helium-filled Ultrastar He-series hard drives in November 2013. HGST sold about a million HelioSeal HDDs in the first 1.5 years on the market, but once numerous operators of large cloud datacenters qualified such drives, their sales started to accelerate. For example, HGST supplied 1.1 million of helium-filled HDDs in Q3 2015 — more than in their first six quarters on the market. Meanwhile back in October of last year, Western Digital said it had sold 10 million HelioSeal hard drives. As it appears from the recent comments made by the company, in just a couple of quarters it has managed to sell another five million helium HDDs with cumulative shipments of such drives topping 15 million units since late 2013.

“I am pleased to note that we have now shipped approximately 15 million helium hard drives cumulatively since the platform’s launch four years ago,” said Michael D. Cordano, president of Western Digital, during a conference call with investors and analysts.

There are multiple reasons why sales of HelioSeal-based HDDs are accelerating. First, the demand for datacenter hard drives is growing, and operators have finally qualified helium-filled HDDs for new deployments. Second, with the systematic increase of drive capacities (a new capacity point is launched every 12 – 18 months), Western Digital can gradually increase shipments of helium-filled drives to existing and new deployments. Third, Western Digital is expanding usage of helium beyond datacenter-class drives to NAS and even consumer HDDs.

From technology standpoint, HelioSeal has made quite a bit of progress in the recent 3.5 years. Initially, it enabled HGST to place seven platters into a single 3.5” HDD and offer a 6 TB drive, which in turn had lower power consumption and higher performance than various competitors. Installation of seven platters into one drive required HGST to redesign some of the internal HDD components, and this is always a challenge. Moreover, late last year HGST introduced an even denser hard drive, the Ultrastar He12 with eight platters, which again required the company to redevelop internal architecture of the HDD.

When it comes to practical progress, the helium-filled Ultrastar drives doubled their capacity from 6 TB in Q4 2013 to 12 TB in Q1 2017. By contrast, conventional air-filled PMR-based drives have not yet made it past 8 TB, increasing their capacity by 33% from 6 TB in Q1 2014. Meanwhile, if we take the SMR-based Ultrastar He12 with 14 TB capacity into account, then the progress will seem quite impressive as well (a 75% increase from 8 TB in August 2013 to 14 TB in 2H 2017).

Speaking of SMR, it does not look like Western Digital is eager to share its plans regarding usage of the technology.

“Shingle [magnetic recording] has been a little bit more limited in terms of the applications because of some of the performance implications of that and that sort of thing,” said Stephen Milligan, CEO of Western Digital. “We feel comfortable with where we are at in terms of SMR transition and the applicability and the drives that we are providing to our customers.”

Unlike drive-managed SMR HDDs from Seagate, SMR HDDs from Western Digital should be managed by hosts and are therefore used only for active archive/deep-archive applications that can support it. This reduces their addressable market, but the company still sells plenty of them: 20 – 35% of data stored today belongs to the two aforementioned categories. Meanwhile, Seagate offers drive-managed SMR-based HDDs for both consumers and datacenters, something that Western Digital does not. For the time being at least, it looks like the company is not planning on disclosing any kind of roadmap for drive-managed SMR devices.

Related Reading:

Western Digital: Sales of Helium-Filled HDDs Accelerating, 15M Sold So Far
  • Comments are Closed

Western Digital: Sales of Helium-Filled HDDs Accelerating, 15M Sold So Far

Western Digital recently announced that it had sold 15 million helium-filled hard drives, indicating that sales of such HDDs are accelerating. Since the launch of the HGST HelioSeal platform about 3.5 years ago, it has enabled HGST to make a number of technological improvements to its hard drives in terms of their capacities. It is noteworthy that while Western Digital is expanding usage of helium, it has not announced plans to expand usage of shingled-magnetic recording (SMR).

HGST, a subsidiary of Western Digital, started volume shipments of its first-generation helium-filled Ultrastar He-series hard drives in November 2013. HGST sold about a million HelioSeal HDDs in the first 1.5 years on the market, but once numerous operators of large cloud datacenters qualified such drives, their sales started to accelerate. For example, HGST supplied 1.1 million of helium-filled HDDs in Q3 2015 — more than in their first six quarters on the market. Meanwhile back in October of last year, Western Digital said it had sold 10 million HelioSeal hard drives. As it appears from the recent comments made by the company, in just a couple of quarters it has managed to sell another five million helium HDDs with cumulative shipments of such drives topping 15 million units since late 2013.

“I am pleased to note that we have now shipped approximately 15 million helium hard drives cumulatively since the platform’s launch four years ago,” said Michael D. Cordano, president of Western Digital, during a conference call with investors and analysts.

There are multiple reasons why sales of HelioSeal-based HDDs are accelerating. First, the demand for datacenter hard drives is growing, and operators have finally qualified helium-filled HDDs for new deployments. Second, with the systematic increase of drive capacities (a new capacity point is launched every 12 – 18 months), Western Digital can gradually increase shipments of helium-filled drives to existing and new deployments. Third, Western Digital is expanding usage of helium beyond datacenter-class drives to NAS and even consumer HDDs.

From technology standpoint, HelioSeal has made quite a bit of progress in the recent 3.5 years. Initially, it enabled HGST to place seven platters into a single 3.5” HDD and offer a 6 TB drive, which in turn had lower power consumption and higher performance than various competitors. Installation of seven platters into one drive required HGST to redesign some of the internal HDD components, and this is always a challenge. Moreover, late last year HGST introduced an even denser hard drive, the Ultrastar He12 with eight platters, which again required the company to redevelop internal architecture of the HDD.

When it comes to practical progress, the helium-filled Ultrastar drives doubled their capacity from 6 TB in Q4 2013 to 12 TB in Q1 2017. By contrast, conventional air-filled PMR-based drives have not yet made it past 8 TB, increasing their capacity by 33% from 6 TB in Q1 2014. Meanwhile, if we take the SMR-based Ultrastar He12 with 14 TB capacity into account, then the progress will seem quite impressive as well (a 75% increase from 8 TB in August 2013 to 14 TB in 2H 2017).

Speaking of SMR, it does not look like Western Digital is eager to share its plans regarding usage of the technology.

“Shingle [magnetic recording] has been a little bit more limited in terms of the applications because of some of the performance implications of that and that sort of thing,” said Stephen Milligan, CEO of Western Digital. “We feel comfortable with where we are at in terms of SMR transition and the applicability and the drives that we are providing to our customers.”

Unlike drive-managed SMR HDDs from Seagate, SMR HDDs from Western Digital should be managed by hosts and are therefore used only for active archive/deep-archive applications that can support it. This reduces their addressable market, but the company still sells plenty of them: 20 – 35% of data stored today belongs to the two aforementioned categories. Meanwhile, Seagate offers drive-managed SMR-based HDDs for both consumers and datacenters, something that Western Digital does not. For the time being at least, it looks like the company is not planning on disclosing any kind of roadmap for drive-managed SMR devices.

Related Reading:

Toshiba Launches N300 HDDs for NAS: Up to 8 TB, Up to 240 MB/s
  • Comments are Closed

Toshiba Launches N300 HDDs for NAS: Up to 8 TB, Up to 240 MB/s

Toshiba this week launched its new lineup of high-reliability hard drives for NAS units. The drives offer up to 8 TB of capacity and are based on enterprise-grade platforms. According to Toshiba’s specifications, these and are among the highest-performing 3.5” HDDs on the planet.

The Toshiba N300 family of hard drives consists of three models with 4 TB, 6 TB and 8 TB capacities, a SATA 6 Gb/s interface, a 7200 RPM spindle speed and a 128 MB buffer. All three HDDs are based on a high-reliability platform that attaches a spindle to both sides of a drive (to curb system-induced vibration), has rotational vibration (RV) sensors, shock sensors and temperature sensors as well as supporting error recovery features. The new HDDs are designed for 24/7 availability, 1 million hours MTBF and have a 180 TB/year workload rating, which is in line with other hard drives for NAS devices with 8 bays and is considerably higher than the workload rating of typical desktop HDDs.

Toshiba’s N300 HDDs resemble the company’s MN05-series drives introduced in February (which are also designed for enterprise-class NASes) and are likely based on the same PMR platters (perpendicular magnetic recording) with up to 1.33 TB capacity per platter (the 8 TB version features six of such discs). In addition to the same platters, the N300 drives also have the same power consumption as the MN05 HDDs, but offer slightly different performance, according to the specifications.

Toshiba N300-Series HDDs
  HDWN180XZSTA HDWN160XZSTA HDWQ140XZSTA
Capacity 8 TB 6 TB 4 TB
RPM 7200 RPM
Interface SATA 6 Gbps
DRAM Cache 128 MB
Data Transfer Speed
(Sustained)		 240 MB/s 210 MB/s 200 MB/s
MTBF 1 million hours
Rated Annual Workload (read and write) 180 TB/year
Acoustics (Seek) 35 dB 34 dB
Power Operating 9.2 W 10.1 W 9.6 W
Active Idle 6.2 W 6.7 W 5.2 W
Warranty 3 years

As for performance, Toshiba claims up to a 240 MB/s sustained data transfer rate as well as a 4.17 ms average latency time for the N300 8 TB model, which is slower compared to the MN05 8 TB. Meanwhile, since the 6 TB and 4 TB N300 HDDs use different platters, their performance is a bit lower (due to the lower areal density).

Toshiba is already shipping its N300 HDDs to partners and the drives are expected to be available in stores this month. Exact prices will depend on the retailer, but keep in mind that although the N300 are aimed at consumers, they are based on advanced platforms and support numerous enterprise-grade features.

Related Reading:

Toshiba Launches N300 HDDs for NAS: Up to 8 TB, Up to 240 MB/s
  • Comments are Closed

Toshiba Launches N300 HDDs for NAS: Up to 8 TB, Up to 240 MB/s

Toshiba this week launched its new lineup of high-reliability hard drives for NAS units. The drives offer up to 8 TB of capacity and are based on enterprise-grade platforms. According to Toshiba’s specifications, these and are among the highest-performing 3.5” HDDs on the planet.

The Toshiba N300 family of hard drives consists of three models with 4 TB, 6 TB and 8 TB capacities, a SATA 6 Gb/s interface, a 7200 RPM spindle speed and a 128 MB buffer. All three HDDs are based on a high-reliability platform that attaches a spindle to both sides of a drive (to curb system-induced vibration), has rotational vibration (RV) sensors, shock sensors and temperature sensors as well as supporting error recovery features. The new HDDs are designed for 24/7 availability, 1 million hours MTBF and have a 180 TB/year workload rating, which is in line with other hard drives for NAS devices with 8 bays and is considerably higher than the workload rating of typical desktop HDDs.

Toshiba’s N300 HDDs resemble the company’s MN05-series drives introduced in February (which are also designed for enterprise-class NASes) and are likely based on the same PMR platters (perpendicular magnetic recording) with up to 1.33 TB capacity per platter (the 8 TB version features six of such discs). In addition to the same platters, the N300 drives also have the same power consumption as the MN05 HDDs, but offer slightly different performance, according to the specifications.

Toshiba N300-Series HDDs
  HDWN180XZSTA HDWN160XZSTA HDWQ140XZSTA
Capacity 8 TB 6 TB 4 TB
RPM 7200 RPM
Interface SATA 6 Gbps
DRAM Cache 128 MB
Data Transfer Speed
(Sustained)		 240 MB/s 210 MB/s 200 MB/s
MTBF 1 million hours
Rated Annual Workload (read and write) 180 TB/year
Acoustics (Seek) 35 dB 34 dB
Power Operating 9.2 W 10.1 W 9.6 W
Active Idle 6.2 W 6.7 W 5.2 W
Warranty 3 years

As for performance, Toshiba claims up to a 240 MB/s sustained data transfer rate as well as a 4.17 ms average latency time for the N300 8 TB model, which is slower compared to the MN05 8 TB. Meanwhile, since the 6 TB and 4 TB N300 HDDs use different platters, their performance is a bit lower (due to the lower areal density).

Toshiba is already shipping its N300 HDDs to partners and the drives are expected to be available in stores this month. Exact prices will depend on the retailer, but keep in mind that although the N300 are aimed at consumers, they are based on advanced platforms and support numerous enterprise-grade features.

Related Reading:

Toshiba Launches N300 HDDs for NAS: Up to 8 TB, Up to 240 MB/s
  • Comments are Closed

Toshiba Launches N300 HDDs for NAS: Up to 8 TB, Up to 240 MB/s

Toshiba this week launched its new lineup of high-reliability hard drives for NAS units. The drives offer up to 8 TB of capacity and are based on enterprise-grade platforms. According to Toshiba’s specifications, these and are among the highest-performing 3.5” HDDs on the planet.

The Toshiba N300 family of hard drives consists of three models with 4 TB, 6 TB and 8 TB capacities, a SATA 6 Gb/s interface, a 7200 RPM spindle speed and a 128 MB buffer. All three HDDs are based on a high-reliability platform that attaches a spindle to both sides of a drive (to curb system-induced vibration), has rotational vibration (RV) sensors, shock sensors and temperature sensors as well as supporting error recovery features. The new HDDs are designed for 24/7 availability, 1 million hours MTBF and have a 180 TB/year workload rating, which is in line with other hard drives for NAS devices with 8 bays and is considerably higher than the workload rating of typical desktop HDDs.

Toshiba’s N300 HDDs resemble the company’s MN05-series drives introduced in February (which are also designed for enterprise-class NASes) and are likely based on the same PMR platters (perpendicular magnetic recording) with up to 1.33 TB capacity per platter (the 8 TB version features six of such discs). In addition to the same platters, the N300 drives also have the same power consumption as the MN05 HDDs, but offer slightly different performance, according to the specifications.

Toshiba N300-Series HDDs
  HDWN180XZSTA HDWN160XZSTA HDWQ140XZSTA
Capacity 8 TB 6 TB 4 TB
RPM 7200 RPM
Interface SATA 6 Gbps
DRAM Cache 128 MB
Data Transfer Speed
(Sustained)		 240 MB/s 210 MB/s 200 MB/s
MTBF 1 million hours
Rated Annual Workload (read and write) 180 TB/year
Acoustics (Seek) 35 dB 34 dB
Power Operating 9.2 W 10.1 W 9.6 W
Active Idle 6.2 W 6.7 W 5.2 W
Warranty 3 years

As for performance, Toshiba claims up to a 240 MB/s sustained data transfer rate as well as a 4.17 ms average latency time for the N300 8 TB model, which is slower compared to the MN05 8 TB. Meanwhile, since the 6 TB and 4 TB N300 HDDs use different platters, their performance is a bit lower (due to the lower areal density).

Toshiba is already shipping its N300 HDDs to partners and the drives are expected to be available in stores this month. Exact prices will depend on the retailer, but keep in mind that although the N300 are aimed at consumers, they are based on advanced platforms and support numerous enterprise-grade features.

Related Reading: